Image of 1 Pack SS1 Condensate Overflow Switch, SS1 T-shaped Float Switch with 3/4-inch adapter and 6-foot wire, HVAC Overflow Shut-Off Float Switch for HVAC
 

1 Pack SS1 Condensate Overflow Switch, SS1 T-shaped Float Switch with 3/4-inch adapter and 6-foot wire, HVAC Overflow Shut-Off Float Switch for HVAC

Effectively detects condensate overflow: The SS1 condensate overflow switch features a water-sealed magnetic reed switch, effectively detects clogged A/C condensate drains, and shuts off the system to prevent water damage to floors, walls, and ceilings. When a blockage occurs, the float inside the fitting rises with the increasing condensate level. The magnetic element inside the float triggers the reed switch to shut off the system and stop operation. Easy to Installation: Easily install the SS1 air conditioner float switch; the low-voltage condensate overflow stop switch can be installed. Horizontally or vertically, in-line or on the auxiliary drain outlet of the primary pan using the included 3/4" adapter, socket, and cap; Furthermore, you can take advantage of the installation flexibility, as the switch can be installed on an angled line and does not need to be level or plumb; Then connect the 6-foot wire to the red or yellow thermostat wires. Quality Material: Made of Schedule 40

Price: £42.99 from ManoMano UK

Stockist Catalogue Product Name Price  
ManoMano UK 1 Pack SS1 Condensate Overflow Switch, SS1 T-shaped Float Switch with 3/4-inch adapter and 6-foot wire, HVAC Overflow Shut-Off Float Switch for HVAC £42.99 Visit Store

Related Products

 
Image of G 1/2"-1/2" pump switch, wire sensor…
 

G 1/2"-1/2" pump switch, wire sensor…

It is mainly used for pressurizing domestic tap water in areas with low water pressure, especially for starting low-pressure showers and for automatic circulation of solar water heaters. It separates the detection room, the magnetic control room, and...


 
Image of Sensor switch, G3/4-G3/4 220V adjustable wire…
 

Sensor switch, G3/4-G3/4 220V adjustable wire…

The induction chamber, magnetic control chamber, and electronic components are designed separately to prevent switch failure caused by magnetic adsorption of iron particles in the pipe. Low water pressure start; the reset spring is made of premium stainless...


 
Image of Manual duct volume damper for backdraft…
 

Manual duct volume damper for backdraft…

Appropriate Size: The bending end interface of the air duct damper measures approximately 5.87 inches / 14.92 cm in diameter, while the other end is approximately 6 inches / 15.24 cm in diameter and 6.25 inches / 15.87 cm in height, making it suitable...